The Pros and Cons of a DIY Toilet Install

The average plumbing and pipe fitting experts earn around $26.52 per hour. This isn’t much considering the amount of work involved during the process of plumbing. Toilet installation is among the most challenging parts of any process of plumbing and fitting.

Despite this toilet installation process requiring time and attention, it’s still fun when you opt to do it yourself. A considerable number of homeowners consider a DIY toilet install to be a better deal than calling in plumbers to do the job done.

Is it worth considering DIY toilet installation, or does it make sense to call in the professionals? This question won’t make sense unless you consider the pros and cons of each of the two options.

Pros of a DIY Toilet Install 

When considering DIY for any of your home-related repairs and installations, you may need to consider a few divergent issues. Some of these issues are an advantage to you, while some may present barriers to the process. Here’re are some advantages.

Cut on Cost 

This is debatable, considering that you still need to buy certain fixtures to complete the toilet installation process. However, doing it yourself saves you a great deal moneywise. Most people wonder how much it costs to install a new toilet.

Well, with a plumber on board, it may cost you much more considering that labor costs are higher. If you know your way around a DIY toilet install, it will make more sense to cut on the additional cost of hiring an expert.

DIY Is Fun

Everything about DIY is fun, especially when doing it with a curious spouse or friend. You get to have fun hanging out while installing the toilet. The beauty of this process is that you can have a manual or use YouTube to direct your every action.

It’s always such a good feeling when you finish a job well done without assistance from plumbing pros. The fun process also involves learning and discovering new skills you never knew you had.

You Get to Do Things Your Way 

This is among the best things when considering a DIY toilet install. You get to decide what goes where. Your decision is also final on the design you would wish for your toilet.

Understanding such dynamics allows you to own the process of installation. On the same note, knowing that you are in control also gives you a feeling of achievement once the process is over.

Cons of DIY Installation

Every good side has the other unseen side of the coin, and a DIY toilet install is not an exception. Before considering DIY plumbing, it would help to consider these cons. 

Limited Experience

The truth is, installing a toilet is never easy. You might end up creating a significant mess out of the process due to your limited experience in installation. It takes a few years of practice for you to install a toilet with minimum hitches.

The lack of experience is, in part, the reason why you may need to hire a plumber. A poorly installed toilet is a significant risk. Nonetheless, working with an experienced plumber minimizes such risks and sets you up for a more straightforward installation process.

You Lack Liability Insurance

Every plumber worth your top dollar has liability insurance in place. This is an essential coverage plan for every plumber, considering the nature of the plumbing process. Unlike in a DIY toilet install, where any injuries incurred may not be compensable, most plumbers have liability insurance in place.

This means that when you hire a plumber, you don’t have to worry about any direct liability in case of injuries or property damage. This is a significant con when considering a DIY toilet install. In the end, the nature of DIY plumbing exposes you to levels of risk you might never have anticipated.

Limited Tools

Installing a toilet isn’t child’s play. You need to have adequate tools to help you navigate the complex process of fitting the system’s specific parts. With DIY, you might end up struggling to get things right. Unless you have accumulated a few tools over time, DIY may be hard to achieve.

You don’t want to start with a process, which will stall half-way through. Without adequate and right tools for the job, you might probably encounter challenges along the way. This article by Service Plumbing & Systems provides a better understanding of the process of replacing your toilet.

What’s Involved in a Toilet Install

Even before considering DIY, you may need to think about the process and what it takes to complete a toilet installation process. First, you need to place the wax ring with tremendous expertise on the flange.

Once the wax ring is sitting as it should, you should consider setting the safe bowl on the flange. This process requires perfection in terms of alignment. You should then install the tank in full adherence to the manufacturer’s instructions.

With this done, you can then proceed to secure the toilet seat. This part requires a combination of strength and focus. Don’t forget to connect the secure water supply line once done with the process.

With these few steps, your new toilet should be up and running. Even so, the devil is in the detail, which means you need to be extra careful to follow every step with caution to guarantee a perfect end to the process.

This Is All You Need To Know About a DIY Toilet Install

When thinking about DIY plumbing, the costs involved, the time taken, and the tools required should all be critical factors to consider. Your toilet is perhaps among the most critical systems that have the potential to ruin the entire drainage. As such, pondering on how to approach the process of toilet installation is essential.

The first things you must consider are the pros and cons of considering a DIY toilet install. In the end, you need to have a clear understanding of the installation process from start to finish to eliminate the risk of surprises.

Besides saving on costs and being in control, DIY plumbing may cause limitations when you lack adequate experience or lack sufficient tools to handle the process.

Was this article useful? You can read more on health, home, and tech in our subsequent blogs. Keep reading for more useful content.